Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

MFG FIBRESTAT Conductive Shallow Assembly Trays

MFG Conductive Fiberglass Shallow Assembly Trays

MFG FIBRESTAT Conductive Shallow Assembly Trays are ESD-safe fiberglass trays for electronics assembly, inspection, and conveyor transport in static-controlled environments. Conductive fiberglass construction dissipates charge to ground, while the shallow profile and flat bottom support smooth movement on conveyors, carts, and workbench surfaces.

Fibrestat conductive materialResistant to hot solder, irons and most solventsComponent assembly

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Size: L x W x H Quantity Discounts View Model
26" x 18" x 5/8"
$66.93
22" x 22" x 3/4"
$68.83
28" x 22" x 2-3/4"
$201.82
30" x 24" x 2-1/8"
$229.91
16-3/8" x 12" x 1"
$29.05
13-1/4" x 10-5/8" x 1"
$26.44
20-3/8" x 15-1/8" x 1"
$43.44
21-7/8" x 16" x 1"
$42.80
18" x 14" x 1"
$31.94
12-3/4" x 10-1/2" x 5/8"
$31.94
20" x 16" x 3"
$47.64
25-3/4" x 17-7/8" x 1-1/8"
$38.94
25-3/4" x 8-3/4" x 1-1/8"
$34.84
17-3/4" x 11-3/4" x 1"
$37.79
17-3/4" x 9" x 1"
$31.70
24" x 12-5/8" x 3/4"
$58.12
27" x 12-1/2" x 3/4"
$59.78
16" x 6" x 1"
$22.68
20-7/8" x 14-1/2" x 1/2"
$46.50
26" x 26" x 1-1/4"
$140.52
24-1/4" x 24-1/4" x 1-7/8"
$131.41
36-1/2" x 24" x 1-1/2"
$172.44
30" x 30" x 1-1/4"
$185.22
35-7/8" x 23-1/2" x 1-1/2"
$199.28
25-1/4" x 19-1/4" x 1-1/8"
$80.46
24-3/4" x 13-5/8" x 1-1/4"
$81.61
30" x 20" x 2"
$122.61
47-5/8" x 23-7/8" x 2-1/4"
$210.36
36-1/2" x 17-1/2" x 1-5/8"
$119.33
24-1/4" x 20-1/4" x 1-1/2"
$105.49
28" x 28" x 1-1/2"
$137.56
7-1/2" x 7-1/2" x 1/2"
$26.82
39-1/2" x 19-1/2" x 2"
$152.51
30" x 26" x 1-1/4"
$134.77
30-1/2" x 24-1/2" x 1-7/8"
$121.05
39" x 19" x 2"
$161.45
40" x 28" x 1-1/2"
$160.80
32" x 18" x 1-1/4"
$127.61
20-5/8" x 16-5/8" x 1-1/2"
$49.13
31" x 25" x 2-3/4"
$100.21
24-1/4" x 20-1/4" x 1-1/8"
$95.66
31" x 26" x 1-5/8"
$143.58
19-1/2" x 19-1/2" x 1-1/4"
$58.61
22-1/2" x 14-1/2" x 2"
$48.42
22-7/8" x 15-1/2" x 1-1/4"
$57.71

Conveyor trays are flat-bottom, low-profile trays that carry parts through conveyors, indexing equipment, rack systems and manual handling lines. The flat bottom gives consistent contact with rails, rollers and belts, and the low walls keep parts within reach without lifting the tray. They are chosen to fit your conveyor or rack, not by general size preference.

MFG molds these from glass-reinforced fiberglass. Fiberglass costs several times what a comparable plastic tray does, so it fits lines where long service life and dimensional stability justify the cost. Confirm the temperature rating for your process with MFG before ordering.

Twenty-nine models are listed, from 7-1/2 in. to 47-5/8 in. long, in four corner profiles (A to D). Twenty-six are standard trays, two are drop-side trays and one is a drop-end tray. Each row shows the outside dimensions by manufacturer model number.


Product Lines
Corner profile A has 8 models, B has 8, C has 5 and D has 8. The smallest is 613008 (7-1/2 x 7-1/2 x 1/2 in.). The largest is 47-5/8 in. long. The drop-side trays are 600108 (29-7/8 x 23-7/8 x 1-1/2 in.) and 600208 (23-7/8 x 14-7/8 x 1-3/8 in.). The drop-end tray is 600308 (29-7/8 x 23-7/8 x 2 in.).

Selecting the Right Model
◆ Start with your equipment. The corner profile, outside length and width must fit your conveyor guides, rack slots or indexer.
◆ Confirm the corner profile before ordering. If you are unsure, call 866-333-0728 with your equipment specifications.
◆ Check the overall height (1/2 in. to 2-1/4 in. outside) against overhead sensors and guides.
◆ Choose drop-side or drop-end trays only when your rack or lane needs side or end access.

Not sure how trays should fit your conveyor or automation?
See the conveyors, washers and automation section

Where Commonly Used
Production and assembly lines, automated and robotic handling, and coating and finishing operations.

CustomMHS carries the full line of MFG fiberglass conveyor trays, backed by the manufacturer’s warranty.