MFG Fiberglass Conveyor and Assembly Trays

Conveyor and assembly trays are flat-bottom, shallow trays that carry parts through conveyors, indexing equipment and assembly stations. The flat bottom gives consistent contact with rails, rollers and belts, and the low walls keep parts within reach without lifting the tray. They are not stacked loaded columns like totes. Selection is driven by your conveyor or fixture, not by general size preference.
Fiberglass materialHigh operating temp range of -60° to 250° FLow profile and radius edges
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Outside Top (LxWxH) | Inside Bottom (LxWxH) | Quantity Discounts | View Model |
|
24-1/2" x 21-1/8" x 1"
|
23-1/2" x 20-3/8" x 7/8"
|
$53.95
|
||
|
25-1/2" x 22-1/2" x 1"
|
24-1/2" x 21-3/4" x 7/8"
|
$56.41
|
||
|
24-1/2" x 22-1/2" x 1"
|
23-1/2" x 21-3/4" x 7/8"
|
$50.22
|
||
|
27-7/8" x 22-3/8" x 1"
|
26-7/8" x 21-3/4" x 7/8"
|
$57.98
|
||
|
23-3/8" x 20-1/4" x 1"
|
22-5/8" x 19-1/4" x 7/8"
|
$48.68
|
||
|
24-1/2" x 21-1/2" x 1"
|
23-1/2" x 20-3/4" x 7/8"
|
$54.39
|
||
|
27" x 21" x 1"
|
26" x 20-1/4" x 7/8"
|
$54.92
|
||
|
26-1/4" x 22" x 1"
|
25-1/4" x 21-1/4" x 7/8"
|
$52.75
|
||
|
28" x 21-1/2" x 1"
|
27" x 20-3/4" x 7/8"
|
$54.90
|
||
|
26-1/4" x 23" x 1"
|
25-1/4" x 22-1/4" x 7/8"
|
$57.98
|
||
|
24-1/2" x 23" x 1"
|
23-1/2" x 22-1/4" x 7/8"
|
$60.61
|
||
|
34-1/4" x 21-3/8" x 1"
|
33-1/4" x 20-5/8" x 7/8"
|
$79.06
|
||
|
27" x 20" x 1"
|
26" x 19-1/4" x 7/8"
|
$56.19
|
||
|
22-1/2" x 20" x 1"
|
21-3/8" x 19-1/4" x 7/8"
|
$42.09
|
||
|
22" x 22" x 3/4"
|
20-7/8" x 20-7/8" x 5/8"
|
$47.08
|
||
|
16-3/8" x 12" x 1"
|
15" x 10-1/2" x 5/8"
|
$26.96
|
||
|
13-1/4" x 10-5/8" x 1"
|
12-1/2" x 9-1/8" x 5/8"
|
$25.36
|
||
|
20-3/8" x 15-1/8" x 1"
|
18-3/8" x 13-1/4" x 3/4"
|
$35.52
|
||
|
21-7/8" x 16" x 1"
|
20-3/8" x 14-3/8" x 3/4"
|
$36.48
|
||
|
22-1/2" x 16-1/2" x 1"
|
20-7/8" x 14-3/4" x 3/4"
|
$38.10
|
||
|
18" x 14" x 1"
|
16-1/2" x 12-1/2" x 3/4"
|
$30.02
|
||
|
18" x 14" x 5/8"
|
16-3/4" x 12-3/4" x 1/2"
|
$31.70
|
||
|
12-3/4" x 10-1/2" x 5/8"
|
11-3/8" x 9" x 1/2"
|
$24.29
|
||
|
20-7/8" x 12-3/4" x 5/8"
|
19-3/8" x 11-3/8" x 1/2"
|
$30.32
|
||
|
25-3/4" x 17-7/8" x 1-1/8"
|
24-3/8" x 16-1/4" x 1"
|
$45.36
|
||
|
25-3/4" x 8-3/4" x 1-1/8"
|
24-3/8" x 7-1/2" x 1"
|
$31.70
|
||
|
17-3/4" x 11-3/4" x 1"
|
16-1/8" x 10-3/4" x 7/8"
|
$28.92
|
||
|
17-3/4" x 9" x 1"
|
16-1/8" x 7-3/4" x 7/8"
|
$27.85
|
||
|
24" x 12-5/8" x 3/4"
|
22-3/4" x 11-1/4" x 5/8"
|
$36.41
|
||
|
27" x 12-1/2" x 3/4"
|
25-3/4" x 11-1/8" x 5/8"
|
$38.15
|
||
|
16" x 6" x 1"
|
14-1/2" x 4-1/2 x 7/8"
|
$18.52
|
||
|
19-1/2" x 10-1/2" x 1-1/4"
|
18-1/2" x 9-1/2" x 1-1/8"
|
$26.68
|
MFG molds these from glass-reinforced fiberglass. Fiberglass costs several times what a comparable plastic tray does, so it fits conveyor and assembly lines where long service life and dimensional stability justify the price. Confirm the temperature rating for your process with MFG before ordering.
Thirty-two models are listed, from 12-3/4 in. to 34-1/4 in. long and 5/8 in. to 1-1/4 in. deep. Each row shows outside top and inside bottom dimensions with the price by manufacturer model number.
Product Lines
The 204 to 218 series (204101 to 218101) are the large flat trays, about 23 to 28 in. long and 1 in. deep outside. The 302 to 338 series cover the mid-size and small trays. 358108 is the deepest at 1-1/4 in. outside.
Selecting the Right Model
◆ Start with your conveyor. Confirm lane width, guide rail spacing and tray stop position before ordering.
◆ Check outside length and width against rails, indexer slots and pallet stops so the tray does not bind.
◆ Use the inside length and width for the usable surface area of your parts.
◆ Check the overall height (5/8 in. to 1-1/4 in. outside) against overhead sensors, stops and guides.
Not sure how trays should fit your conveyor or automation?
See the conveyors, washers and automation section
Where Commonly Used
Production and assembly lines, automated and robotic handling, and inspection and test stations.
CustomMHS carries the full line of MFG fiberglass conveyor and assembly trays, backed by the manufacturer’s warranty.