MFG Conductive Nest-Stack Fiberglass Containers, 17-7/8 to 42-1/2 in Long

MFG FIBRESTAT conductive nest-stack containers are glass-reinforced thermoset fiberglass totes for static-sensitive parts that also need heat resistance, load strength and dimensional stability. They stack when full, then rotate 180 degrees to nest when empty. Ten models run from 17-7/8 x 10-5/8 x 5 in up to 42-1/2 x 20 x 14-1/4 in. MFG publishes continuous service from -60°F to 250°F and chemical resistance to detergents, cutting oils and alkaline solutions from pH 3.0 to 10.0. Fiberglass costs several times what a plastic tote does, and it earns that back where heat, heavy loads or automated handling would warp or wear out plastic.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Size | Quantity Discounts | View Model |
|
23.5" long x 16.13" wide x 10.25" high
|
$114.97
|
||
|
42.5" long x 20" wide x 14.25" high
|
$185.98
|
||
|
42-1/2" long x 20" wide x 7-1/2" high
|
$153.93
|
||
|
17-7/8" long x 10-5/8" wide x 5" high
|
$46.11
|
||
|
19-3/4" long x 12-1/2" wide x 6" high
|
$53.63
|
||
|
20-1/2" long x 12-7/8" wide x 8" high
|
$58.12
|
||
|
24-1/4" long x 14-3/4" wide x 8" high
|
$69.40
|
||
|
25-1/4" long x 18" wide x 10" high
|
$91.98
|
||
|
27-1/2" long x 20" wide x 14-1/8" high
|
$121.48
|
||
|
25-1/4" long x 18" wide x 6" high.
|
$82.50
|
Ask for the measured surface resistance, not just the word “conductive.” MFG defines conductive products as below 10^5 to 10^6 ohms and static dissipative products as 10^5 to 10^11 ohms, and states that FIBRESTAT products meet or exceed ANSI/ESD S20.20. The guide’s target is 10^6 to 10^9 ohms, and a material below 10^5 can be too conductive for charged device protection. Match the exact model’s published value to your device sensitivity and your ESD control program.
Nest ratio is the number to compare when empties return, and the 180-degree rotation has to be trained, or a loaded column will not hold. Eight of the ten models have a matching lid, and 780200 and 780800 have none listed. If automation will handle these containers, tell the integrator the exact model before you buy.
Product Lines
MFG FIBRESTAT conductive nest-stack containers in 10 models from 17-7/8 x 10-5/8 x 5 in to 42-1/2 x 20 x 14-1/4 in, with matching lids for eight of them.
Selecting the Right Model
◆ Footprint, choose by the pallet, rack, conveyor or workstation, from 17-7/8 to 42-1/2 in long
◆ Depth, choose the height, from 5 to 14-1/4 in, by the load height, and size by the inside dimensions
◆ ESD level, ask for the measured surface resistance in ohms of the exact model, and match it to your device sensitivity and ESD control program under ANSI/ESD S20.20
◆ Nesting, ask for the nest ratio, and train operators to rotate the container 180 degrees to stack or nest
◆ Lids, choose a matching lid for eight models, since 780200 and 780800 have none listed
◆ Heat and chemistry, choose fiberglass where plastic totes fail, up to the published 250°F and pH 3.0 to 10.0
◆ Automation, give the integrator the exact model before you buy
◆ Empties, choose a conductive stack only container if empties stay on site and nesting is not needed
Containers, Totes & Trays Buying Guide
Handling static-sensitive parts?
See ESD containers done properly in the Containers, Totes & Trays Buyer’s Guide
Where Commonly Used
MFG conductive nest-stack containers are commonly used in electronics manufacturing, component storage, and heated or automated handling where static control and dimensional stability matter.
CustomMHS carries MFG FIBRESTAT conductive nest-stack containers and lids. All purchases include the manufacturer’s factory warranty.