Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

MFG Fiberglass Conveyor Trays

MFG Fiberglass Conveyor Trays | Standard, Drop Side, and Drop End Configurations

MFG fiberglass conveyor trays are flat-bottom, low-profile trays designed to carry parts smoothly through conveyor systems, indexing equipment, rack systems, and manual handling workflows. The flat bottom ensures consistent contact with conveyor rails, rollers, and belts. Low wall heights keep parts accessible during assembly, inspection, and processing without lifting the tray off the line.

 

Fiberglass materialHigh operating temp range of -60° to 250° FLow profile and radius edges

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Description Outside Dimensions: L x W x H Corner Profile Price 1-20 View Model
Tray
7-1/2" x 7-1/2" x 1/2"
"A"
$19.80
Tray
26" x 26" x 1-1/4"
"A"
$74.08
Tray
24-1/4" x 24-1/4" x 1-7/8"
"A"
$74.08
Tray
36-1/2" x 24-3/4" x 1-1/2"
"A"
$105.77
Tray
30" x 30" x 1-1/4"
"B"
$114.35
Tray
35-7/8" x 23-1/2" x 1-1/2"
"B"
$101.94
Tray
25-1/4" x 19-1/4" x 1-1/8"
"C"
$52.37
Tray
25-3/4" x 13-5/8" x 1-1/4"
"C"
$52.91
Tray
30" x 20" x 2"
"C"
$76.62
Tray
47-5/8" x 23-7/8" x 2-1/4"
"B"
$131.32
Tray
22-1/2" x 14-1/2" x 2"
"D"
$50.06
Tray
19-1/2" x 19-1/2" x 1-1/4"
"D"
$47.64
Tray
36-1/2" x 17-1/2" x 1-5/8"
"A"
$76.62
Tray
24-1/4" x 20-1/4" x 1-1/2"
"A"
$70.25
Tray
28" x 28" x 1-1/2"
"B"
$96.30
Tray
39-1/2" x 19-1/2" x 2"
"D"
$98.34
Tray
30" x 26" x 1-1/4"
"A"
$85.55
Tray
30-1/2" x 24-1/2" x 1-7/8"
"A"
$89.41
Tray
39" x 19" x 2"
"B"
$105.49
Tray
40" x 28" x 1-1/2"
"B"
$114.35
Tray
32" x 18" x 1-1/4"
"B"
$76.50
Tray
30" x 28" x 1-1/2"
"B"
$112.54
Tray
20-5/8" x 16-5/8" x 1-1/2"
"C"
$57.63
Tray
24-1/4" x 20-1/4" x 1-1/8"
"C"
$56.84
Tray
31" long x 25" wide x 2.75" high
"D"
$70.05
Tray
24-1/4" x 20-1/4" x 1-1/8"
"D"
$92.59
Tray with Drop Sides
29-7/8" x 23-7/8" x 1-1/2"
"D"
$69.55
Tray with Drop Sides
23-7/8" x 14-7/8" x 1-3/8"
"D"
$40.71
Tray with Drop Ends
29-7/8" x 23-7/8" x 2"
"D"
$69.55

Conveyor trays are flat-bottom, low-profile trays that carry parts through conveyors, indexing equipment, rack systems and manual handling lines. The flat bottom gives consistent contact with rails, rollers and belts, and the low walls keep parts within reach without lifting the tray. They are chosen to fit your conveyor or rack, not by general size preference.

MFG molds these from glass-reinforced fiberglass. Fiberglass costs several times what a comparable plastic tray does, so it fits lines where long service life and dimensional stability justify the cost. Confirm the temperature rating for your process with MFG before ordering.

Twenty-nine models are listed, from 7-1/2 in. to 47-5/8 in. long, in four corner profiles (A to D). Twenty-six are standard trays, two are drop-side trays and one is a drop-end tray. Each row shows the outside dimensions by manufacturer model number.


Product Lines
Corner profile A has 8 models, B has 8, C has 5 and D has 8. The smallest is 613008 (7-1/2 x 7-1/2 x 1/2 in.). The largest is 47-5/8 in. long. The drop-side trays are 600108 (29-7/8 x 23-7/8 x 1-1/2 in.) and 600208 (23-7/8 x 14-7/8 x 1-3/8 in.). The drop-end tray is 600308 (29-7/8 x 23-7/8 x 2 in.).

Selecting the Right Model
◆ Start with your equipment. The corner profile, outside length and width must fit your conveyor guides, rack slots or indexer.
◆ Confirm the corner profile before ordering. If you are unsure, call 866-333-0728 with your equipment specifications.
◆ Check the overall height (1/2 in. to 2-1/4 in. outside) against overhead sensors and guides.
◆ Choose drop-side or drop-end trays only when your rack or lane needs side or end access.

Not sure how trays should fit your conveyor or automation?
See the conveyors, washers and automation section

Where Commonly Used
Production and assembly lines, automated and robotic handling, and coating and finishing operations.

CustomMHS carries the full line of MFG fiberglass conveyor trays, backed by the manufacturer’s warranty.