Quantum Conductive Dividable Grid Containers

The Quantum Conductive Divider Box Container provides superior protection for sensitive electronic components by shielding against electromagnetic interference (EMI), electrostatic discharge (ESD), and induced fields. Built from carbon-filled copolymer polypropylene, these containers ensure permanent conductivity for long-term reliability in static-sensitive environments.
Molded divider slotsStrong stacking rimsReinforced external ribbingSubdivsion to 1-1/8" square
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Outside L x W x H | Inside L x W x H | Carton Qty | Carton Pricing | View Model |
|
10-7/8" x 8-1/4" x 3-1/2"
|
9-3/16" x 6-9/16" x 3"
|
20 Per Carton
|
$365.06
|
||
|
10-7/8" x 8-1/4" x 5"
|
9-3/16" x 6-9/16" x 4-1/2"
|
20 Per Carton
|
$411.98
|
||
|
16-1/2" x 10-7/8" x 3-1/2"
|
14-7/8" x 9-1/4" x 3"
|
12 Per Carton
|
$314.20
|
||
|
16-1/2" x 10-7/8" x 6"
|
14-7/8" x 9-1/4" x 5-1/2"
|
8 Per Carton
|
$265.36
|
||
|
16-1/2" x 10-7/8" x 8"
|
14-7/8" x 9-1/4" x 7-1/2"
|
8 Per Carton
|
$331.34
|
||
|
22-1/2" x 17-1/2" x 3"
|
20-5/8" x 15-5/8" x 2-1/2"
|
6 Per Carton
|
$341.60
|
||
|
22-1/2" x 17-1/2" x 6"
|
20-5/8" x 15-5/8" x 5-1/2"
|
3 Per Carton
|
$404.65
|
||
|
22-1/2" x 17-1/2" x 8"
|
20-5/8" x 15-5/8" x 7-1/2"
|
3 Per Carton
|
$227.25
|
||
|
22-1/2" x 17-1/2" x 12"
|
20-5/8" x 15-5/8" x 11-1/2"
|
3 Per Carton
|
$284.43
|
Conductive dividable grid containers are Quantum’s static-controlled version of its dividable grid bin. Molded slots on the inside walls take dividers, so one bin splits into compartments for several components. Quantum lists the conductive material at a surface resistivity of less than 10^5 ohms per square, says the dividers are permanently conductive and says the conductivity is not affected by washing with normal cleaners.
Conductive containers only protect when they are grounded. The guide’s ESD section explains that the target for static-dissipative work is usually 10^6 to 10^9 ohms, and that below 10^5 ohms can be too conductive for charged device protection. Quantum’s value is under 10^5, so confirm it fits your ESD control plan before ordering, and ask for measured surface resistance.
Nine models are listed in three footprints, from 10-7/8 x 8-1/4 in. to 22-1/2 x 17-1/2 in. outside, and 3 in. to 12 in. deep. Every row shows outside and inside dimensions, the carton quantity and the carton price. Dividers and snap-on conductive covers (COV91000CO for the small footprint) are sold separately by model number.
Product Lines
The small footprint (10-7/8 x 8-1/4 in.) has DG91035CO and DG91050CO, with 20 per carton. The mid footprint (16-1/2 x 10-7/8 in.) has DG92035CO, DG92060CO and DG92080CO, with 12 or 8 per carton. The large footprint (22-1/2 x 17-1/2 in.) has DG93030CO, DG93060CO, DG93080CO and DG93120CO, with 6 or 3 per carton. DG91035CO.
Selecting the Right Model
◆ Choose conductive when the contents are static-sensitive. Standard plastic grid containers are not a substitute.
◆ Choose the footprint to fit your shelf or bin rack, then the depth to fit your tallest part.
◆ Size by the inside bottom dimensions. Inside depth is 1/2 in. less than outside depth on every model.
◆ Order conductive dividers by model number: DL for length, DS for width, each with the CO suffix.
◆ Ground every unit. Quantum states that all units must be properly grounded.
What does ESD done properly mean for containers?
See the ESD section of the guide
Where Commonly Used
Electronics storage, assembly and transport where static-sensitive parts are kept in separate compartments.
CustomMHS carries the full line of Quantum conductive dividable grid containers, backed by the manufacturer’s warranty.