Bishamon X-Series Compact Scissor Lift Tables

The Bishamon X-Series is a compact hydraulic scissor lift table built for production lines, machine tool environments, and assembly workstations where floor space is limited and ergonomic positioning matters. Platform sizes run from 18" x 25.5" to 20" x 40". Capacities cover 440 to 1,650 lbs. Travel ranges from 16" on the smallest models up to 45" on the double-scissor X-30 variants. All models are finished in baked enamel.

Three actuation types are available across 15 models, allowing buyers to match the power source to the environment and cycle requirements. Prices are shown by manufacturer model number for direct competitor comparison.

Choosing the Right Actuation Type:

The most important decision on this page is how to power the table. Each actuation type suits different workflows and facility constraints.

♦ Manual Hydraulic (C models): Operated via a foot pump. No electrical or air supply required. The right choice when cycle frequency is low or when the power supply at the workstation is limited. The lowest purchase price of the three options. Models: X-20C, X-25C, X-30SC, X-50C, X-75C.

♦ Electro-Hydraulic (E models): Push-button electric operation for effortless lifting. The right choice for high-cycle applications or when operators need to raise and lower loads repeatedly throughout the shift without physical effort. Requires a standard electrical connection at the workstation. Models: X-25E, X-30SE, X-50E, X-50SE, X-75E.

♦ Air-Hydraulic (P models): Foot-pedal operation using facility-supplied compressed air. Combines the convenience of powered lift with the simplicity of an air supply rather than an electrical connection. The right choice when compressed air is readily available at the workstation but electrical power is not, or when a spark-free environment is required. Models: X-25P, X-30SP, X-50P, X-50SP, X-75P.

♦ Choosing capacity and platform: Within each actuation type, models are available in 550-, 660-, 1,100-, and 1,650-lb capacities. The X-30 variants use a double-scissor mechanism to achieve 45" of travel from a 20" x 40" platform -- the right choice when raised height is the priority. The X-20C and X-50SE/X-50SP use the smallest platform (approximately 18"-19.5" wide x 25.5" long) for the tightest workstation footprints.

Not sure which model fits your application? Call 866-333-0728 or use the quote form.

Where Bishamon X-Series Tables Are Commonly Used:

♦ Machine tool and CNC workstations: Positioning parts, fixtures, or tooling at a consistent height for loading and unloading machine tools in tight production cells where a standard lift table footprint won't fit.

♦ Assembly lines: Raising sub-components or work-in-process to ergonomic height at individual stations, reducing bending and repetitive strain across high-cycle operations.

♦ Inspection and testing: Bringing parts to a stable, consistent working height for dimensional checks, quality inspection, or functional testing where operator reach and angle affect accuracy.

♦ Maintenance and repair workstations: Elevating components, motors, or assemblies to a comfortable service height in confined maintenance areas without overhead lifting equipment.