Industrial Guard Rail Systems

Industrial Guard Rail Systems, Modular Steel Barriers Rated to 10,000 lb Impact

Guard rail systems are heavy-duty modular steel safety barriers tested to withstand 10,000 pounds of impact force at four miles per hour, the standard for industrial forklift and powered vehicle traffic in warehouses, manufacturing plants, and distribution centers. Steel columns anchor to the floor, and steel rails connect between columns to create a continuous barrier that physically separates vehicle traffic from pedestrian zones, machinery, building columns, in-plant offices, and pallet rack ends.

Product Lines Available:

Pre-Configured and Component Systems
♦ Heavy Duty, Best-Selling Pre-Configured Units, Single & Double Rail Systems
♦ Heavy Duty Columns, 4.75" x 4.75", 10" x 10" Base Plate
♦ Heavy-Duty Guard Railing, Rail Lengths from 2' to 10'
♦ MECO Single, Double & Triple Guard Rail, All-Welded, 48" to 96" Wide
♦ MECO Double Square Rail Corner Guard
♦ Handle-It Build-A-Rail Guard Rails, 48" to 96"

Accessories for Handle-It Guard Rail
♦ Self-Closing Pedestrian Gate
♦ Double Rail Swing Gate with Shepherd Hooks
♦ Down Guard Adapters, sets rails flush with the floor
♦ 45° Angle Adapter, follows equipment or wall contours at corners
♦ Lift Out Adapters, tool-free rail removal for forklift access

Selecting the Right Type:

♦ Configuration, choose Single, Double, or Triple Rail based on the impact protection level your area requires.
♦ Layout needs, use Pre-Configured Units for standard runs, or build custom lengths with individual Columns and Railing sections.
♦ Access points, add Self-Closing Pedestrian Gates for foot traffic, Swing Gates for vehicle or pallet openings, or Lift Out Adapters for occasional forklift access.

Where Commonly Used:

♦ Warehouses and Distribution Centers, guard rails separate forklift traffic from pedestrian zones.
♦ Manufacturing Plants, barriers protect machinery, building columns, and in-plant offices from impact.
♦ Pallet Rack Ends, guard rail and corner guard configurations protect vulnerable rack corners.
♦ High-Traffic Aisles, gates and adapters support controlled pedestrian and forklift access points.

CustomMHS carries the full line of MECO and Handle-It guard rail systems, backed by each manufacturer's warranty.

Pre-Configured Heavy Duty Units, Single & Double Rail Systems Pre-configured starter units simplify ordering for standard aisle and perimeter layouts.  View All →	Heavy Duty Columns, 4.75" x 4.75", 10" x 10" Base Plate Steel columns anchor the guard rail system to the floor at custom intervals.  View All →	Heavy-Duty Guard Railing, Rail Lengths from 2' to 10' Long Individual rail sections fill gaps or extend runs around machinery and rack ends.  View All →
MECO Single, Double & Triple Guard Rail All-weld rail configurations, 48 to 96 inches wide, for durable perimeter protection.   View All →	Meco Double Square Rail Corner Guard Reinforces vulnerable corners and columns against repeated impact.  View All →	Handle-It Build-A-Rail Guard Rails Configurable 48 to 96-inch rails for custom-length barrier layouts.  View All →
Accessories For Handle-it Guard Rail
Self-Closing Pedestrian Gate Automatically closes behind workers passing through a barrier section.  View All →	Double Rail Swing Gate with Shepherd Hooks Swing gate design provides a vehicle or pallet opening along the barrier line.  View All →	Down Guard Adapters Sets rails flush with the floor for low-level protection.  View All →
45° Angle Adapter Allows guard railing to closely follow the contour of equipment or walls at corners.  View All →	Lift Out Adapters Bolt-on sleeve allows a rail section to be removed without tools for forklift access.  View All →

​