Section OneWhen do you need a cantilever ladder?
When something at floor level keeps a normal ladder away from the work.
Short answer: You need a cantilever ladder when a standard ladder's base would be blocked by machinery, a conveyor, a tank or a vat. If the ladder can roll right up to the work, a standard rolling ladder is the simpler choice.
Quick answers- Standard rolling ladder: The platform sits over the base. The ladder must stand beside the work.
- Cantilever ladder: The platform extends beyond the base, over an obstacle, without touching it.
- Published sizes: Ballymore reach depths of 14, 28, 35 and 42 in.
The test is simple. Stand where the ladder would stand and look at the floor between you and the work. If there is something there that you cannot move and cannot stand on, that distance is your overhang.
A note on this guideThis guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.
Section TwoHow the two differ
One difference in shape, with consequences for the base.
Short answer: A cantilever platform shifts the load away from the ladder's footprint, so the ladder needs a wider or weighted base to stay stable.
Cantilever vs. standard rolling ladder | Standard rolling ladder | Cantilever ladder |
|---|
| Platform position | Over the base | Extended past the base |
| Gets you to | Work directly above where the ladder stands | Work above an obstacle |
| Base | Sized to the height | Wider or weighted, to balance the overhang |
| Floor space | Less | More |
| Typical use | Racks, shelving, mezzanine edges, general access | Machinery, conveyors, tanks, vats, overhead storage, aircraft and vehicle maintenance |
| Brands on our site | Ballymore, Cotterman, EGA | Ballymore |
Everything else is shared. Both are mobile ladder stands under OSHA 1910.23(e), with the same limits on step rise, step depth and slope, and the same handrail and guardrail thresholds.
Section ThreeReach depths and treads
The Ballymore cantilever line on our site.
Short answer: Four reach depths, each in two tread types, for eight configurations.
Ballymore cantilever ladders| Reach depth | Perforated tread | Serrated grating tread |
|---|
| 14 in. | Yes | Yes |
| 28 in. | Yes | Yes |
| 35 in. | Yes | Yes |
| 42 in. | Yes | Yes |
Perforated tread is the standard. Serrated grating, also called Grip Strut, has a self-cleaning step design and is the choice for wet, oily or dirty conditions.
Ask for the restStep count, platform height, capacity and base size depend on the model and are not shown on every listing. Tell us the height and the reach, and we will confirm the figures before you order.
Section FourHow to measure for the overhang
Measure the obstacle, not the work.
Short answer: The reach depth has to be at least the distance from the front of the obstacle to where the user needs to stand.
- Measure how far the obstacle sticks out from the work, at floor level and at its widest point.
- Measure the height of the obstacle. The underside of the platform has to clear it.
- Measure the height of the work, to size the platform height.
- Choose the smallest reach depth that covers the distance in step one.
Worked example
A conveyor runs along a machine and stands 30 in. out from the service panel you need to reach. A 28 in. reach depth is 2 in. short, so the user would still be leaning. A 35 in. reach depth covers it with 5 in. to spare. Choose the 35 in. model.
If the obstacle is only 12 in. deep, the 14 in. model covers it. Do not buy 42 in. of overhang for a 12 in. problem. More overhang means a bigger base and a heavier ladder.
For platform height and step count, use the method in how to choose a rolling safety ladder.
Section FiveChoosing by application
Find the row that matches the job.
Short answer: If nothing is in the way, you do not need the overhang.
Stock on racks and shelving
Standard rolling ladder.
Order picking
Stock picking ladder.
Servicing a machine with a guard, base or conveyor in front
Cantilever ladder.
Sampling or inspecting tanks and vats
Cantilever ladder.
Aircraft and vehicle maintenance
Cantilever ladder. The platform reaches over the wing or body without touching it.
Overhead storage above a fixed bench or fixture
Cantilever ladder.
Standing work at one height for a long time
Section SixCommon mistakes
What goes wrong when the wrong one is chosen.
Short answer: The dangerous mistake is using a standard ladder and leaning over the obstacle.
- Leaning out from a standard ladder. If the user's body is outside the handrails, the ladder is the wrong ladder.
- Resting the platform on the equipment. The platform is not designed to touch what it reaches over.
- Not measuring the floor space. The base is larger than a standard ladder's. Check the aisle and the turns.
- Forgetting the load rating. The rating covers the user plus tools and materials.
- Buying the longest overhang to be safe. Size to the obstacle.
Browse cantilever ladders and rolling safety ladders.
Section SevenFrequently asked questions
The questions I hear most on quote calls.
What is a cantilever ladder?
A rolling safety ladder whose platform extends beyond its base, so the user can stand over an obstacle such as a machine, conveyor or tank without the ladder touching it.
When do I need a cantilever ladder?
When a standard ladder's base would be blocked at floor level by machinery, a conveyor, a tank or a vat, so the ladder cannot stand next to the work.
How much overhang do cantilever ladders have?
The Ballymore cantilever ladders on our site come in 14, 28, 35 and 42 in. reach depths.
How do I choose the reach depth?
Measure how far the obstacle sticks out from the work and choose the smallest reach depth that covers it. A 30 in. obstacle needs the 35 in. model.
Is a cantilever ladder less stable than a standard ladder?
The overhang shifts load away from the footprint, so a cantilever ladder is built with a wider or weighted base to compensate.
Do cantilever ladders follow the same OSHA rules?
Yes. They are mobile ladder stands under OSHA 1910.23(e), with the same step, slope, handrail and guardrail requirements.