Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

How to Choose a Rolling Safety Ladder: Height, Step Count and OSHA Basics

Three decisions size a rolling ladder: how high your feet need to be, what the load rating has to carry, and which tread suits the floor conditions.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: Ballymore · Cotterman · EGAQuestions: 866-333-0728
Section One

How do you choose a rolling safety ladder?

Size it to where your feet need to be, not where your hands need to be.

Short answer: Work out the platform height you need, convert it to a step count, choose a load rating that covers the person plus everything they carry, and pick the tread for your conditions.

Quick answers
  • Height: Top step height equals the height of the work minus the height you comfortably work at.
  • Step count: OSHA limits step rise to 10 in., so divide the top step height in inches by 10 and round up for the minimum.
  • Load rating: 300 lb as the industrial floor. 375 lb where tools or materials are carried.
  • OSHA: Handrails above 4 ft. Guardrails, midrails and toeboards above 10 ft.

A rolling safety ladder, which OSHA calls a mobile ladder stand, is a set of stairs on wheels with handrails. It rolls to the job, locks down under the user's weight and gives a stable place to stand and work with both hands.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

Height and step count

Two measurements and one division.

Short answer: Subtract your working height from the height of the task to get the top step height. Then divide by the step rise.

Step one: top step height

Measure the height of the thing you need to reach. Subtract the height at which the user works comfortably when standing, which is your own measurement to take. The result is how high the user's feet need to be.

Step two: step count

OSHA 1910.23(e) limits step rise on a mobile ladder stand to not more than 10 in. So the minimum number of steps is the top step height in inches divided by 10, rounded up. Ladders are sold by step count, and the listing for each model gives its exact top step height.

Worked example

The top shelf is at 12 ft, which is 144 in. Say the user handles cartons comfortably at about 60 in. from where they stand. That figure is an example, so use your own. The top step needs to be at about 144 - 60 = 84 in., or 7 ft. Divide by 10: 84 / 10 = 8.4, so you need at least a 9 step ladder. Check the top step height on the listing before you order.

Check the ceiling

At 7 ft off the floor a standing person's head is around 13 ft. Look for sprinkler heads, lights, ducts and door headers on the route as well as at the work.

Section Three

OSHA basics

What 1910.23 requires of a mobile ladder stand.

Short answer: Step rise no more than 10 in., step depth at least 7 in., slope no more than 60 degrees, handrails above 4 ft, and guardrails above 10 ft.

OSHA 1910.23(e) requirements
ItemRequirement
Step riseNot more than 10 in.
Step depthNot less than 7 in.
Stringer slopeNot more than 60 degrees from horizontal
HandrailsRequired when the top step is above 4 ft
Guardrails, midrails and toeboardsRequired above 10 ft
InspectionBefore initial use in each work shift, 1910.23(b)(9)

Standard rolling ladders sit close to the 60 degree limit, which keeps the base short. A 50 degree walk-down ladder climbs more like a stairway, so the user can come down facing forward while carrying something. The price is a longer base.

Because the height thresholds trigger handrails and guardrails, the step count you choose also decides how much rail the ladder carries.

Section Four

Load rating

The rating covers everything on the ladder.

Short answer: Working load is the user plus all tools, equipment and materials. Choose 300 lb as a minimum for industrial use and 375 lb where loads are carried.

Ladder duty ratings
TypeDutyWorking loadSuits
IAASpecial duty375 lbHeavy industrial; worker plus substantial tools and materials
IAExtra heavy duty300 lbIndustrial. A sensible default for most warehouse and plant use
IHeavy duty250 lbLight industrial. Easier to exceed than people expect
IIMedium duty225 lbCommercial. Rarely right in a plant
IIILight duty200 lbHousehold. Not for industrial work

Worked example

A 220 lb worker with 10 lb of clothing and boots carries a 45 lb carton: 220 + 10 + 45 = 275 lb. That is over a 250 lb Type I rating and inside a 300 lb Type IA rating with 25 lb to spare. If the cartons are sometimes heavier, go to 375 lb. The Cotterman 1,500-Series is described as the higher-capacity frame. Ask us for the rating on the model you choose.

Section Five

Treads, casters and materials

Match these to the floor and the weather.

Short answer: Choose the tread by what is on people's boots. Choose the caster by whether you trust the user to set a brake.

Tread types
TreadBest for
Expanded metalGeneral warehouse use. Self-cleaning.
PerforatedRetail and storerooms
Grip strut, also called serrated gratingSevere wet, greasy or icy conditions
Abrasive matCleaner office and retail areas
Solid metal with ribbed rubberOffice use
  • Spring-loaded casters. Spring-loaded casters retract under the user's weight, and the ladder settles onto fixed feet or pads. Nothing to remember.
  • Manual locks. Manual locking casters or brakes have to be set by the operator every time.
  • Material. Steel is the default. Aluminum is for ladders that are repositioned constantly. Stainless is for washdown.

Series on our site: Cotterman 1,000-Series and 1,500-Series, Ballymore Safety Ladders and the Ballymore M-2,000 Series, each in several tread types. Browse rolling safety ladders.

Section Six

Choosing by application, and common mistakes

Find your row, then check the list.

Short answer: Most wrong ladders are too short, or rated for the person and not the load.

General stock access in a warehouse
Rolling safety ladder, expanded metal tread, 300 lb or more.
Order picking, up and down all day
Stock picking ladder. See stock picking ladders.
Carrying cartons down
50 degree walk-down ladder.
Wet, oily or outdoor use
Grip strut tread.
Reaching over a machine, conveyor or tank
Washdown areas
Stainless steel ladder.
  • Buying too short and stretching. Size the top step so the user works without reaching overhead.
  • Rating for body weight only. Count tools and materials.
  • Not checking the aisle. Taller ladders have longer, wider bases. Measure the aisle and the turns.
  • Skipping the inspection. Inspect before first use each shift.
  • Rolling the ladder with someone on it. Move it empty.

More in our ladders and work platforms guide.

Section Seven

Frequently asked questions

The questions I hear most on quote calls.

How tall of a rolling ladder do I need?

Subtract the height at which the user works comfortably from the height of the task. The result is the top step height. Then check the listing for the model with that top step height.

How many steps do I need on a rolling ladder?

OSHA limits step rise to 10 in., so divide the top step height in inches by 10 and round up for the minimum. An 84 in. top step needs at least 9 steps.

What does OSHA require for rolling ladders?

Under 1910.23(e), step rise of not more than 10 in., step depth of at least 7 in., slope of not more than 60 degrees, handrails above 4 ft, and guardrails, midrails and toeboards above 10 ft.

What weight rating should a rolling ladder have?

300 lb is a reasonable industrial minimum and 375 lb is recommended where tools or materials are carried. The rating covers the user plus everything on the ladder.

Which ladder tread is best for wet or oily floors?

Grip strut, also called serrated grating, which is made for severe wet, greasy or icy conditions.

How do rolling ladders lock in place?

Spring-loaded casters retract under the user's weight so the ladder rests on fixed feet. Other models use manual locking casters or brakes that the operator sets.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Ballymore and Cotterman rolling safety ladders and stock picking ladders.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Want us to size the ladder?

Tell us the height you need to reach, what the user carries, and the floor conditions, and we will recommend a model. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse rolling safety ladders at custommhs.com

Browse all ladders and platforms

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS ladders and work platforms guide and rolling ladder listings · OSHA 29 CFR 1910.23.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.