Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

How Much Does a Wire Security Cage Cost? Price Factors and Ways to Save

A wire cage is priced by the panel, the post, the door and the lock. Here is what moves the number, and where you can take cost out without giving up security.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: WireCrafters Style 840 wire partitions and security cagesQuestions: 866-333-0728
Section One

How much does a wire security cage cost?

It depends on six things, and you control most of them.

Short answer: The price of a wire security cage is set by the number of walls, the height, whether it has a ceiling, the doors, the locks, and freight and installation. We do not publish cage prices because they change, but every one of those factors is yours to adjust.

Quick answers
  • Walls: Fewer walls cost less. Use the building's walls where you can.
  • Height: Height is a large cost step. Going from 8 ft to 12 ft costs far more than going from 8 ft to 10 ft.
  • Locks: Locking hardware ranges from under $200 for a key lock to over $2,000 for a card reader or alarm bar.
  • Fastest way to a number: Use the WireCrafters Partition Builder or send us a sketch. Quotes typically come back within one business day.

A cage is a kit of standard parts: panels 1 to 10 ft wide, posts, a door and hardware. Because the parts are standard, the price follows the parts count closely. Change the layout and you change the price.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

The six price factors

In rough order of how much each one moves the total.

Short answer: Wall count and height drive the steel. Doors and locks drive the hardware.

What drives cage cost
FactorChoicesEffect on price
Number of walls1, 2, 3 or 4 wallA 1-wall cage between two existing walls is the cheapest per square foot. A free-standing 4-wall cage is the most.
Height8 ft 5-1/4 in., 10 ft 5-1/4 in., 12 ft 5-1/4 in. stock; custom to 50 ftOn a four-wall woven cage, 10 ft adds several hundred dollars. 12 ft adds several times that.
CeilingNone, or wire ceiling panels spanning up to 30 ftAdds panels. Often cheaper than running walls to the roof deck.
DoorsHinged 3 or 4 ft; double hinged 6 or 8 ft; sliding 3 to 10 ft; vertical riseWider and sliding doors cost more and need more hardware.
LocksKey, keypad, five-button, card reader, magnetic, alarm barUnder $200 to over $2,000 per door at the time of writing.
Freight and installPanel weight, crew timeWelded panels are roughly 1/4 to 1/3 lighter than woven at the same size.

One factor that matters less than people expect is the mesh. On one matched pair of cages we compared, woven and welded were within about 1 percent of each other. See woven wire vs. welded wire partitions.

Section Three

Worked example: how walls change the parts count

Same floor space, three different cages.

Short answer: A 10 x 20 ft cage needs 60 ft of wire wall as a free-standing unit, 40 ft against one wall, and 30 ft in a corner.

Wall footage for a 10 x 20 ft cage
LayoutMathWire wall needed
4-wall, free-standing20 + 10 + 20 + 1060 ft
3-wall, against one building wall (20 ft side)10 + 20 + 1040 ft
2-wall, in a corner20 + 1030 ft

Backing the cage against one wall takes out a third of the panels and posts. Putting it in a corner takes out half. The door, the lock and the floor space stay the same.

Panels come in 1 ft steps from 1 to 10 ft wide, and posts can be up to 10 ft 2 in. apart. Laying the cage out in 10 ft bays keeps the post count down.

Check the building wall first

The wall you are borrowing has to be as secure as the cage. Drywall next to a 10 gauge wire panel is the weak point.

Section Four

Five ways to save

None of these reduce security.

Short answer: Use existing walls, hold the height down, choose the door carefully, right-size the lock, and order everything at once.

  1. Use existing building walls. One, two or three wall cages use the building for the rest.
  2. Do not buy height you do not need. Ask what the cage has to stop. If nobody is going over an 8 ft panel, a wire ceiling on an 8 ft cage can cost less than 12 ft walls.
  3. Match the door to the traffic. A sliding door needs a clear parking run beside the opening at least as wide as the door. A hinged door is simpler when you have the swing room.
  4. Right-size the lock. Coded or card locks cost more up front but are usually cheaper than rekeying when staff change. A key lock is fine for a cage two people use.
  5. Order it complete. Order the adjustable filler panel with the run so the cage closes to the wall without a custom panel, and consolidate orders to limit freight.

If you are spending extra anywhere, a heavier door specification is usually a better spend than heavier panels. The door is what gets used and what gets attacked.

Section Five

What to send for a quote

Six facts get you an accurate price the first time.

Short answer: Footprint, height, walls, door, lock and what is being protected.

  1. Length and width of the cage in feet.
  2. Height, and whether it needs a ceiling.
  3. Which sides are building walls.
  4. Door type and width, and which way it has to open.
  5. How people get in: key, code, card, or exit only.
  6. What is inside. Controlled substances need a DEA-specified cage, which has its own rules.

You can price a layout yourself in the WireCrafters Partition Builder, or send a sketch. Standard cages are also listed ready-made: woven wire and welded wire.

Section Six

Common mistakes

Where budgets go wrong.

Short answer: The usual errors are pricing four walls when two would do and treating the lock as an afterthought.

  • Free-standing when a corner was available. Check the room before you design the cage.
  • Forgetting the locks. On multi-cage projects the locks can rival the cost of the partitions.
  • Ignoring the gap under the door. Stock doors leave a 3-1/4 in. floor sweep. If small items have to stay in, ask for the lower angle cover bar, which brings it to 1-3/4 in.
  • Planning to store on the ceiling. Wire ceilings are not load bearing.
  • Leaving out installation. Installation takes a crew of two or three. Budget for it.

More detail in our wire partitions and security cages guide and WireCrafters Style 840 guide.

Section Seven

Frequently asked questions

The questions I hear most on quote calls.

How much does a wire security cage cost?

It depends on the number of walls, the height, whether there is a ceiling, the doors and the locks. We do not publish cage prices because they change. Quotes typically come back within one business day.

What is the cheapest way to build a wire cage?

Use existing building walls. A one-wall cage between two walls is the cheapest per square foot, and a corner cage needs half the wire wall of a free-standing one.

Does a taller cage cost much more?

Yes. Height is a large cost step. On a four-wall woven cage, 10 ft adds several hundred dollars and 12 ft adds several times that.

How much do cage door locks cost?

At the time of writing, lock options run from under $200 for a key lock to over $2,000 for a card reader or alarm bar.

Is welded wire cheaper than woven wire?

Not reliably. On one matched pair of cages the prices were within about 1 percent. Welded panels are lighter, which can reduce freight and installation labor.

How long does it take to get a quote?

Quotes are typically returned within one business day.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting WireCrafters heavy duty woven wire partitions, medium duty welded wire cages and driver and building access cages.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Want a real number for your cage?

Send us the footprint, the height, how many walls you need and what the door has to do, and we will quote it. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse wire partitions and security cages at custommhs.com

Price a cage in the WireCrafters Partition Builder

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS wire partitions and security cages guide, WireCrafters Style 840 guide and product listings · WireCrafters published specifications.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.