Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

Woven Wire vs. Welded Wire Partitions: Strength, Cost and Lead Time Compared

Both are 10 gauge wire in a steel frame. The difference is how the wires are joined and how big the opening is, and that decides where each one belongs.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: WireCrafters Style 840 woven · RapidWire weldedQuestions: 866-333-0728
Section One

Woven wire or welded wire?

Decide by what you are protecting.

Short answer: Choose woven wire for regulated, high-value or high-abuse storage. Choose welded wire for inventory control and general storage where lighter panels and easier handling matter.

Quick answers
  • Woven: 10 gauge wire, 2 x 1 in. opening, interlocked at every crossing. Heavy duty.
  • Welded: 10 gauge wire, 2 x 2 in. square mesh, welded at each intersection. Medium duty.
  • The real differences: Reach-through and weight. Price and lead time are closer than most people expect.

The wire is the same gauge in both. What changes is the opening and the joint. Confirm which one you are buying by the opening size, not the brand name, because some resellers use the same product name for both.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

Strength and tamper resistance

How the wires are joined decides what happens when someone attacks the panel.

Short answer: Woven wire is interlocked, so one cut does not open a hole. Welded wire is fused, and cutting a weld releases that intersection.

Woven, 2 x 1 in.

Interlocked at every crossing

Each wire is crimped over and under the next. Cutting one wire leaves the weave around it holding. The 1 in. dimension blocks a hand and forearm.

Welded, 2 x 2 in.

Fused at each intersection

Rigid and flat. It holds its shape through cut-outs for conveyors or pipes. A 2 x 2 in. opening admits a hand.

Panel construction
SpecificationHeavy duty wovenMedium duty welded
Wire gauge1010
Mesh2 x 1 in. woven2 x 2 in. welded
Frame1-1/4 x 1-1/4 x 1/8 in. hot-rolled angle1-1/4 x 1-1/4 in. angle
Extra rigidityFlat steel stiffeners on panels over 3 ft 6 in. longNot specified
Posts2 x 2 in., 14 gauge square tube2 in. square
Hardware3/8 in., accessible from inside only3/8 in.
Typical useRegulated, high value, high abuseInventory control, lighter duty

For controlled substances, 21 CFR 1301.72 calls for walls of not less than No. 10 gauge steel fabric with openings of not more than 2-1/2 in. across the square. The WireCrafters DEA cage is built in 10 gauge 2 x 1 in. mesh.

Section Three

Weight

The one place the two differ by a wide margin.

Short answer: Welded panels are roughly a quarter to a third lighter than woven panels of the same size.

Published panel weights
Panel sizeWovenWelded
1 x 4 ft13 lb8 lb
4 x 4 ft31 lb22 lb
8 x 4 ft53 lb38 lb
10 x 4 ft63 lb45 lb
8 x 5 ft63 lb44 lb
10 x 5 ft74 lb54 lb

Worked example

An 8 ft 5-1/4 in. tall wall is two 4 ft panels stacked. A 40 ft run in 8 ft wide bays is five bays, so ten 8 x 4 ft panels. In woven that is 10 x 53 = 530 lb of panel. In welded it is 10 x 38 = 380 lb. That is 150 lb less to ship and lift into place on one wall.

Both come in stock widths from 1 to 10 ft in 1 ft steps, and 4 ft and 5 ft panel heights that stack to reach the system height.

Section Four

Cost and lead time

Closer than the names suggest.

Short answer: Welded is not reliably cheaper, and the fulfillment window is the same for woven and welded versions of the same cage.

Cost

On one matched pair of cages we compared, the woven and welded prices were within about 1 percent. On another pair the welded cage cost more. Where welded does save is weight, which shows up in freight and in installation labor. Confirm the price on your own layout and quantity before assuming either way.

Lead time

RapidWire welded is positioned as a quick ship line, but no lead time is published in days, and the fulfillment window on our listings is identical for woven and welded versions of the same cage. If your date is tight, ask us for the current lead time on both.

Summary
FactorWoven 2 x 1 in.Welded 2 x 2 in.
Tamper resistanceInterlocked at every crossingFused at each intersection
Reach-throughBlocks hand and forearmAdmits a hand
Weight, 8 x 4 ft panel53 lb38 lb
Cut-outsNot published as a strengthHolds shape through cut-outs
PriceCompare on your layoutCompare on your layout
DutyHeavyMedium
Section Five

Choosing by application

Find the row that matches what is behind the wire.

Short answer: If someone reaching through the mesh is a problem, choose woven.

Controlled substances, Schedule III to V
DEA-specified woven wire cage.
High-value parts, tools, electronics near the perimeter
Woven. The 1 in. opening stops reach-through.
General inventory and stockroom separation
Welded.
Panels that need cut-outs for conveyors or pipe
Welded.
Long straight runs
Either. Both use the same posts, with a maximum spacing of 10 ft 2 in.
Rack backing and rack enclosures
Welded 2 x 2 in., which is how those lines are built.
Machine guarding
Neither as a default. Guarding uses a 1-1/4 in. square mesh sized to reach distances. See our barriers and machine guarding guide.
Section Six

Common mistakes

What to confirm before you order.

Short answer: The usual errors are choosing welded only for price and forgetting about reach-through.

  • Assuming welded is cheaper. Get both quoted.
  • Shelving against welded mesh. Small items within arm's reach of a 2 x 2 in. mesh can be lifted out.
  • Ordering by product name. Confirm the opening size in writing.
  • Assembling with fasteners on the outside. Hardware should face in so it cannot be reached from outside.
  • Mixing meshes in a run. Woven and welded panels are different weights and specifications. Keep one run in one mesh.

For pricing factors see how much a wire security cage costs. For the full system see our WireCrafters Style 840 guide.

Section Seven

Frequently asked questions

The questions I hear most on quote calls.

What is the difference between woven wire and welded wire partitions?

Woven wire is 10 gauge wire with a 2 x 1 in. opening, interlocked at every crossing. Welded wire is 10 gauge wire in a 2 x 2 in. square mesh, welded at each intersection.

Which is stronger, woven or welded wire?

Both use 10 gauge wire. Woven is rated heavy duty because it is interlocked, so one cut does not open a hole, and its 1 in. opening blocks reach-through. Welded is rated medium duty.

Is welded wire cheaper than woven wire?

Not reliably. On one matched pair of cages the prices were within about 1 percent, and on another pair the welded cage cost more.

Which ships faster?

The fulfillment window on our listings is the same for woven and welded versions of the same cage. No lead time in days is published, so ask for the current figure.

How much lighter is welded wire?

Roughly a quarter to a third. An 8 x 4 ft panel weighs 53 lb in woven and 38 lb in welded.

Which mesh do I need for a DEA cage?

21 CFR 1301.72 requires not less than No. 10 gauge steel fabric with openings no more than 2-1/2 in. across the square. The WireCrafters DEA cage uses 10 gauge 2 x 1 in. mesh.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting WireCrafters Style 840 woven wire partitions and RapidWire welded wire cages.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Not sure which mesh your cage needs?

Tell us what is inside the cage and who it has to keep out, and we will recommend the mesh. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse heavy duty woven wire partitions at custommhs.com

Browse medium duty welded wire cages

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS WireCrafters Style 840 guide, wire partitions guide and product listings · WireCrafters published specifications · 21 CFR 1301.72.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.