Logitrans Electric Lift-Drive Self-Maxi Logiflex Stacker

The Logitrans Self-Maxi Logiflex Stacker is a fully powered walkie stacker with powered lift and drive, featuring a fork-over design and 22" wide x 45" long forks for handling open-entry palletized loads. Four models are available at lift heights of 36", 47", 55", and 63". All four models maintain a constant 3,000 lb capacity across the full height range; capacity does not decrease with lift height in this series.

The adjustable ergonomic handle accommodates operators of different heights, and rounded corners minimize impact damage to pallets, goods, and surrounding equipment during daily operation. The fork-over design requires open-entry pallets with accessible leg openings, verify pallet compatibility before ordering.

Note: Logitrans offers a second SELF MAXI configuration using 1003-series model numbers, which covers heights from 36" to 130" with capacity that decreases at higher heights. The 1203-series on this page is limited to 36"-63" but maintains a constant 3,000 lb across all four heights. Contact CustomMHS at 866-333-0728 to confirm the appropriate configuration for the application.

Models and Specifications:

♦ Self Maxi 1203-36, 22" W, 45" L fork-over forks. Maximum lift height: 36". Capacity 3,000 lb.
♦ Self Maxi 1203-47, 22" W, 45" L, fork-over forks. Maximum lift height: 47". Capacity 3,000 lb.
♦ Self Maxi 1203-55, 22" W, 45" L, fork-over forks. Maximum lift height 55". Capacity 3,000 lb.
♦ Self Maxi 1203-63, 22" W, 45" L fork-over forks. Maximum lift height: 63". Capacity 3,000 lb.

Selecting the Right Model:

♦ Lift height, 36", 47", 55", or 63", select based on the highest rack position or stacking height needed. All four models share the same 3,000 lb rated capacity regardless of height.
♦ 1203-series vs. 1003-series SELF MAXI: this page covers the 1203-series (4 models, 36"-63", constant 3,000 lb). The 1003-series covers 9 models from 36" to 130", with capacity tapering from 3,000 lb at lower heights to 1,320 lb at 130". If the required height is above 63", the 1003-series is required. If constant 3,000 lb capacity at heights up to 63" is the priority, verify with Logitrans which configuration is appropriate for the application and load weight.
♦ Fork-over design and pallet compatibility: open-entry pallets with accessible leg openings are required. Solid-deck pallets are not compatible.

Where Commonly Used:

Warehouse and distribution operations use the 1203-series to load 3,000 lb pallets into rack positions at 36"-63" at constant full capacity; production and manufacturing floors use it to position heavy palletized raw material or sub-assembly loads without manual pushing effort, and staging and pre-assembly operations use fully powered drive to transport heavy loads across the staging zone without operator fatigue.

CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer's factory warranty.