Logitrans ELFRA 1001 Adjustable Box Holder Rotator, 2,200 lb, 36" to 75" Lift
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Fork Size | Lifting Height | Capacity | Price | View Model |
|
22" or 27" wide x 49" long
|
36"
|
2,200 pounds
|
$17,740.80
|
||
|
22" or 27" wide x 49" long
|
47"
|
2,200 pounds
|
$18,003.15
|
||
|
22" or 27" wide x 49" long
|
55"
|
2,200 pounds
|
$18,265.50
|
||
|
22" or 27" wide x 49" long
|
63"
|
2,200 pounds
|
$18,532.80
|
||
|
22" or 27" wide x 49" long
|
75"
|
2,200 pounds
|
$18,790.20
|
The box holder adjusts from 31.5" to 48" wide with a single handle and no tools, so one rotator can serve several container widths. The rotator tilts loads beyond 90 degrees, which turns the opening toward the operator or down toward a bin, a table or a conveyor for picking, sorting, kitting and assembly. Logitrans recommends clamps when tilting more than 60 degrees.
Two published limits matter when choosing a model. Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. The full rating also applies only while the load’s center stays close to the rotation center, and tilting capacity falls as that distance grows. Electric-lift models are powered industrial trucks under OSHA 29 CFR 1910.178 according to the Buying Guide, which means operator training and an evaluation at least once every three years.
♦ Fork Size: 22" or 27" wide x 49" long, fork-over
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: 31.5" to 48", adjusted by a tool-free handle
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: battery-powered lift, manual push
Selecting the Right ELFRA 1001 Model
◆ Lifting height, choose the height that puts the box opening at a comfortable working level, and remember that tilting only works while the rotation center is between 27" and 46.5", so a taller model extends the lift but not the tilting window
◆ Fork width, choose 22" or 27" at the time of order, since both use the same 49" fork length
◆ Box holder width, confirm that your boxes and crates fall between 31.5" and 48" wide, and call 866-333-0728 for loads wider than 48"
◆ Load position, keep the load’s center close to the rotation center, since the full rating applies only there and tilting capacity falls as the distance grows
◆ Tilt, choose clamps for tilting more than 60 degrees, since Logitrans recommends them at that angle
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178, since this model has an electric lift
Lift Equipment Buying Guide
Check the tilt window before you choose a lifting height.
See Box holder rotators in the Reel Lifts & Rotators Buying Guide
Where Commonly Used
The ELFRA 1001 is commonly used at assembly, kitting, picking and sorting stations, and on light production lines, to bring boxes and crates to working height and tilt them toward the operator.
CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.