Logitrans ELFSR 1001 Non-Adjustable Box Holder Rotator with Straddle Legs, 2,200 lb, 36" to 75" Lift

The Logitrans ELFSR 1001 rotator with non-adjustable box holders and straddle legs lifts, rotates and tilts boxes, crates and containers of one standard width, so the contents can be reached at a comfortable height and angle. It lifts with a battery-powered pump and is pushed by hand. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models ELFSR 1001-36, ELFSR 1001-47, ELFSR 1001-55, ELFSR 1001-63 and ELFSR 1001-75), with 22" or 27" wide x 49" long forks specified at order.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Fork Size | Lifting Height | Capacity | Price | View Model |
|
22" or 27" wide x 49" long
|
36"
|
2,200 pounds
|
$17,221.05
|
||
|
22" or 27" wide x 49" long
|
47"
|
2,200 pounds
|
$17,478.45
|
||
|
22" or 27" wide x 49" long
|
55"
|
2,200 pounds
|
$17,740.80
|
||
|
22" or 27" wide x 49" long
|
63"
|
2,200 pounds
|
$18,003.15
|
||
|
22" or 27" wide x 49" long
|
75"
|
2,200 pounds
|
$18,260.55
|
The straddle legs pass on the outside of the load instead of under it, which lets the load sit lower to the floor and adds stability. The rotator can handle solid-deck, closed-bottom and custom base pallets and containers, which the fork-over ELFR 1001 cannot, and the legs need more aisle width because of the wider stance. The holders are fixed at one width, so the fork width and the holder width are both ordered specifications, and a fixed holder cannot be changed later. The width options listed for the 22" fork are 31.5", 33.5", 37.8" and 39.4", and for the 27" fork 39.4", 41.3", 45.7" and 47.2", and the exact width should be confirmed on your quote.
The rotator tilts loads beyond 90 degrees, and clamps are recommended when tilting more than 60 degrees. Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. Because the ELFSR 1001 has an electric lift, your Buying Guide treats it as a powered industrial truck under OSHA 29 CFR 1910.178 even though the operator pushes it, which means operator training and an evaluation at least once every three years.
♦ Fork Size: 22" or 27" wide x 49" long, with straddle legs
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: fixed, 31.5", 33.5", 37.8" or 39.4" (22" fork) and 39.4", 41.3", 45.7" or 47.2" (27" fork), confirm on your quote
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: battery-powered lift, manual push
Selecting the Right ELFSR 1001 Model
◆ Straddle legs or fork-over, choose straddle legs for solid-deck, closed-bottom or custom base pallets, and the lower-priced fork-over ELFR 1001 for open-entry pallets and skids
◆ Fixed or adjustable, choose the ELFSR 1001 when every box is the same width, and the adjustable ELFSRA 1001 (31.5" to 48") when one unit has to handle several widths
◆ Holder width, record both the fork width and the holder width on the order, and call 866-333-0728 to confirm available sizes
◆ Lifting height, choose the height that puts the box opening at a comfortable working level, and remember that tilting only works while the rotation center is between 27" and 46.5"
◆ Aisle width, allow for the wider stance of the straddle legs when planning travel paths
◆ Remote control, a cable remote for rotation, lifting and lowering is standard, and a wireless remote is a priced upgrade
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178
Lift Equipment Buying Guide
Decide between straddle legs and fork-over before you record the holder width.
See Fork over or straddle legs in the Reel Lifts & Rotators Buying Guide
Where Commonly Used
The ELFSR 1001 is commonly used where every box is the same size but sits on solid-deck, closed-bottom or mixed pallets, such as picking, sorting, kitting and assembly with standard containers.
CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.