Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Logitrans ELFSRA 1001 Adjustable Box Holder Rotator with Straddle Legs, 2,200 lb, 36" to 75" Lift

Logitrans ELFSRA 1001 Straddle Leg Rotator, 2,200 lb | CustomMHS

The Logitrans ELFSRA 1001 adjustable box holder rotator with straddle legs lifts, rotates and tilts boxes, crates and containers so the contents can be reached at a comfortable height and angle. It lifts with a battery-powered pump and is pushed by hand. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models ELFSRA 1001-36, ELFSRA 1001-47, ELFSRA 1001-55, ELFSRA 1001-63 and ELFSRA 1001-75), with 22" or 27" wide x 49" long forks specified at order.

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Fork Size Lifting Height Capacity Price View Model
22" or 27" wide x 49" long
36"
2,200 pounds
$20,240.55
22" or 27" wide x 49" long
47"
2,200 pounds
$20,502.90
22" or 27" wide x 49" long
55"
2,200 pounds
$20,760.30
22" or 27" wide x 49" long
63"
2,200 pounds
$21,022.65
22" or 27" wide x 49" long
75"
2,200 pounds
$21,289.95

 

The straddle legs pass on the outside of the load instead of under it, which lets the load sit lower to the floor and adds stability. That also means the rotator can handle solid-deck and closed-bottom pallets and containers, which the fork-over ELFRA 1001 cannot, since fork-over versions need an open-entry pallet or skid. The box holder adjusts from 31.5" to 48" wide with a single handle and no tools, and the rotator tilts loads beyond 90 degrees, with clamps recommended when tilting more than 60 degrees.

Choose straddle legs for the base, not for tilting, and plan for the wider stance. The straddle version costs roughly a seventh more than the matching fork-over model and needs more aisle width. Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. Your Buying Guide treats electric-lift models like this one as powered industrial trucks under OSHA 29 CFR 1910.178, which means operator training and an evaluation at least once every three years.

♦ Fork Size: 22" or 27" wide x 49" long, with straddle legs
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: 31.5" to 48", adjusted by a tool-free handle
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: battery-powered lift, manual push

Selecting the Right ELFSRA 1001 Model
◆ Straddle legs or fork-over, choose straddle legs for solid-deck or closed-bottom pallets and containers, and the fork-over ELFRA 1001 for open-entry pallets and skids
◆ Lifting height, choose the height that puts the box opening at a comfortable working level, and remember that tilting only works while the rotation center is between 27" and 46.5", so a taller model extends the lift but not the tilting window
◆ Fork width, choose 22" or 27" at the time of order, since both use the same 49" length
◆ Box holder width, confirm that your boxes and crates fall between 31.5" and 48" wide, and call 866-333-0728 for loads wider than 48"
◆ Aisle width, allow for the wider stance of the straddle legs when planning travel paths
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178, since this model has an electric lift

Lift Equipment Buying Guide
Decide between straddle legs and fork-over before you pick a lifting height.
See Fork over or straddle legs in the Reel Lifts & Rotators Buying Guide

Where Commonly Used
The ELFSRA 1001 is commonly used at assembly, kitting, picking and sorting stations where boxes and containers sit on solid-deck or closed-bottom bases and need to be lifted and tilted toward the operator.

CustomMHS carries Logitrans rotators. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What is the difference between the ELFSRA 1001 and the ELFRA 1001?

Pallet compatibility. The ELFRA 1001 uses fork-over construction, which requires open-entry pallets with accessible leg openings, so solid-deck pallets and closed-bottom containers will not work. The ELFSRA 1001 uses straddle legs that accommodate all pallet types, including solid-deck, closed-bottom, and custom base configurations. The straddle-leg models cost more for that flexibility.

When should I pay the premium for straddle legs?

Whenever pallet types vary or are outside your control. Operations running a mix of base configurations, receiving inbound freight on supplier-specified pallets, or using proprietary skids all benefit, since the alternative with a fork-over unit is segregating loads by pallet type before processing. If every load in your operation arrives on open-entry pallets, the ELFRA 1001 covers it at a lower cost.

What are the five models, and what separates them?

Lift height only. The 1001-36, 1001-47, 1001-55, 1001-63, and 1001-75 reach 36, 47, 55, 63, and 75 inches. All five carry 2,200 pounds, use straddle legs, include the same rotating tilting attachment and adjustable box holder, and share the same 49-inch fork length. The Selection Guide states all five are otherwise identical.

Which lift height should I order?

Base it on the working height needed for comfortable content access after tilting, not on the tallest available. The tilt function works best when the box opening faces the operator at a comfortable height, so measure where your operators actually reach into containers rather than the maximum the unit can reach.

What box widths does the adjustable holder accept?

Widths from 31.5 to 48 inches, adjusted by hand without tools in a single adjustment. Verify that every box and crate width in your operation falls within that range before ordering, since loads wider than 48 inches are not compatible with this unit at any model height.

Which fork width should I specify?

Either 22 or 27 inches, specified at time of order. Both use the same 49 inch fork length, so this is a width decision only and cannot be changed after delivery. Confirm it against the loads and base configurations you handle most often.