Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Logitrans SELFSRA 1003 Adjustable Box Holder Rotator with Straddle Legs, Electric Lift and Drive, 2,200 lb, 36" to 75" Lift

Logitrans SELFSRA 1003 Adjustable Box Holder Rotator with Straddle Legs

The Logitrans SELFSRA 1003 adjustable box holder rotator combines an electric lift, an electric drive and straddle legs in one unit. It lifts, rotates and tilts boxes, crates and containers, and it drives itself, so the operator walks with it instead of pushing. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models SELFSRA 1003-36, SELFSRA 1003-47, SELFSRA 1003-55, SELFSRA 1003-63 and SELFSRA 1003-75), with 22" or 27" wide x 49" long forks specified at order.

Get a Fast Quote →Read the Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Fork Size Lifting Height Capacity Price View Model
22" or 27" wide x 49" long
36"
2,200 pounds
$27,863.55
22" or 27" wide x 49" long
47"
2,200 pounds
$28,125.90
22" or 27" wide x 49" long
55"
2,200 pounds
$28,383.30
22" or 27" wide x 49" long
63"
2,200 pounds
$28,645.65
22" or 27" wide x 49" long
75"
2,200 pounds
$28,903.05

 

The straddle legs pass on the outside of the load instead of under it, which lets the load sit lower to the floor and adds stability. The rotator can handle solid-deck, closed-bottom and custom base pallets and containers, which a fork-over model cannot, and the legs need more aisle width because of the wider stance. The box holder adjusts from 31.5" to 48" wide with a single handle and no tools, and the rotator tilts loads beyond 90 degrees.

Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. Logitrans recommends clamps when tilting more than 60 degrees. Because the SELFSRA has an electric lift and an electric drive, your Buying Guide treats it as a powered industrial truck under OSHA 29 CFR 1910.178, which means operator training, a workplace evaluation and certification, with each operator evaluated at least once every three years.

♦ Fork Size: 22" or 27" wide x 49" long, with straddle legs
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: 31.5" to 48", adjusted by a tool-free handle
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: electric lift and electric drive

Selecting the Right SELFSRA 1003 Model
◆ Straddle legs or fork-over, choose straddle legs for solid-deck, closed-bottom or custom base pallets, and the fork-over SELFRA 1003 for open-entry pallets and skids, and note that the straddle legs add only a small premium once powered drive is included
◆ Powered drive, choose the SELFSRA 1003 when operators move between stations all shift or travel distances are long, and the manual-push ELFSRA 1001 when they are short
◆ Lifting height, all five models carry 2,200 lb to their full height, so choose the height that fits your operators and workstations, and remember that tilting only works while the rotation center is between 27" and 46.5"
◆ Fork width, choose 22" or 27" at the time of order, since both use the same 49" length
◆ Box holder width, confirm that your boxes and crates fall between 31.5" and 48" wide
◆ Aisle width, allow for the wider stance of the straddle legs when planning travel paths
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178

Lift Equipment Buying Guide
Decide between straddle legs and fork-over before you pay for powered drive.
See Fork over or straddle legs in the Reel Lifts & Rotators Buying Guide

Where Commonly Used
The SELFSRA 1003 is commonly used for assembly, kitting, picking and sorting on solid-deck or closed-bottom pallets, where operators move between stations all shift.

CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

Where does the SELFSRA 1003 sit in the box holder rotator line?

At the top. It combines powered lift, powered drive, and straddle leg construction in one unit, so it carries both features that the three simpler models trade against each other. All four models in the family share the same 31.5 to 48 inch adjustable box holder range, the same 22 or 27 inch by 49 inch forks, the same 36 to 75 inch lift range, and the same 2,200 pound capacity.

How does it compare with the SELFRA 1003?

Both are powered drive with identical lift heights and capacity. The difference is leg style and pallet compatibility. The SELFRA 1003 uses fork-over construction, limited to open-entry pallets, and is lower priced. Choose the SELFSRA 1003 when solid-deck, closed-bottom, or mixed pallet types are present in the operation.

How does it compare with the ELFSRA 1001?

Both use straddle legs and the same adjustable box holder widths and capacity. The ELFSRA 1001 is manual push and lower priced. Choose the SELFSRA 1003 when transport distances, cycle frequency, or operator fatigue justify powered drive, since that is the only difference between the two.

What are the five models, and what separates them?

Maximum lift height only. The 1003-36, 1003-47, 1003-55, 1003-63, and 1003-75 reach 36, 47, 55, 63, and 75 inches. Every other specification is identical across the five, including straddle legs, 2,200-pound capacity, powered lift and drive, the 49-inch fork length, and the tool-free box holder adjustment.

Which lift height should I order?

Base it on the working height required for comfortable content access after tilting, not the maximum available. The tilt function works best when the box opening faces the operator at a comfortable height, so measure where operators actually reach into containers rather than how high the unit can go.

What should I confirm before ordering?

Three things. Verify that every box and crate width in the operation falls within the 31.5 to 48 inch holder range, since loads wider than 48 inches are not compatible. Specify fork width at 22 or 27 inches at order time, because it cannot be changed after delivery. And confirm that powered drive and straddle legs are both genuinely needed, since dropping either one moves you to a lower-priced model in the same family.