Logitrans SELFSRA 1003 Adjustable Box Holder Rotator with Straddle Legs, Electric Lift and Drive, 2,200 lb, 36" to 75" Lift

The Logitrans SELFSRA 1003 adjustable box holder rotator combines an electric lift, an electric drive and straddle legs in one unit. It lifts, rotates and tilts boxes, crates and containers, and it drives itself, so the operator walks with it instead of pushing. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models SELFSRA 1003-36, SELFSRA 1003-47, SELFSRA 1003-55, SELFSRA 1003-63 and SELFSRA 1003-75), with 22" or 27" wide x 49" long forks specified at order.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Fork Size | Lifting Height | Capacity | Price | View Model |
|
22" or 27" wide x 49" long
|
36"
|
2,200 pounds
|
$27,863.55
|
||
|
22" or 27" wide x 49" long
|
47"
|
2,200 pounds
|
$28,125.90
|
||
|
22" or 27" wide x 49" long
|
55"
|
2,200 pounds
|
$28,383.30
|
||
|
22" or 27" wide x 49" long
|
63"
|
2,200 pounds
|
$28,645.65
|
||
|
22" or 27" wide x 49" long
|
75"
|
2,200 pounds
|
$28,903.05
|
The straddle legs pass on the outside of the load instead of under it, which lets the load sit lower to the floor and adds stability. The rotator can handle solid-deck, closed-bottom and custom base pallets and containers, which a fork-over model cannot, and the legs need more aisle width because of the wider stance. The box holder adjusts from 31.5" to 48" wide with a single handle and no tools, and the rotator tilts loads beyond 90 degrees.
Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. Logitrans recommends clamps when tilting more than 60 degrees. Because the SELFSRA has an electric lift and an electric drive, your Buying Guide treats it as a powered industrial truck under OSHA 29 CFR 1910.178, which means operator training, a workplace evaluation and certification, with each operator evaluated at least once every three years.
♦ Fork Size: 22" or 27" wide x 49" long, with straddle legs
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: 31.5" to 48", adjusted by a tool-free handle
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: electric lift and electric drive
Selecting the Right SELFSRA 1003 Model
◆ Straddle legs or fork-over, choose straddle legs for solid-deck, closed-bottom or custom base pallets, and the fork-over SELFRA 1003 for open-entry pallets and skids, and note that the straddle legs add only a small premium once powered drive is included
◆ Powered drive, choose the SELFSRA 1003 when operators move between stations all shift or travel distances are long, and the manual-push ELFSRA 1001 when they are short
◆ Lifting height, all five models carry 2,200 lb to their full height, so choose the height that fits your operators and workstations, and remember that tilting only works while the rotation center is between 27" and 46.5"
◆ Fork width, choose 22" or 27" at the time of order, since both use the same 49" length
◆ Box holder width, confirm that your boxes and crates fall between 31.5" and 48" wide
◆ Aisle width, allow for the wider stance of the straddle legs when planning travel paths
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178
Lift Equipment Buying Guide
Decide between straddle legs and fork-over before you pay for powered drive.
See Fork over or straddle legs in the Reel Lifts & Rotators Buying Guide
Where Commonly Used
The SELFSRA 1003 is commonly used for assembly, kitting, picking and sorting on solid-deck or closed-bottom pallets, where operators move between stations all shift.
CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.