Jamco Stainless Steel Work Stands

Jamco Stainless Steel Work Stands | All-Welded 16-Gauge, Polished, Floor-Mount Pads

Jamco stainless steel workstands are built for environments requiring corrosion-resistant, easily sanitized work surfaces and open shelving, such as cleanrooms, laboratories, healthcare facilities, food service kitchens, and pharmaceutical production areas. All units are constructed from all-welded 16-gauge stainless steel with a polished finish. The 1-1/2" stainless 16-gauge corner angle legs provide rigid support. Pre-punched mounting pads are included on all models for floor anchoring when a fixed installation is required.

All four models are 30" high and 2-shelf. Two depth classes are available: 18" deep for the narrower 24" and 30" wide units, and 24" deep for the wider 36" and 48" wide units.

Models and Specifications:

♦ XW124, 24" W, 18" D, 30" H. 2-Shelf. All-welded 16-gauge stainless steel, polished finish, floor-mount pads included.

♦ XW130, 30" W, 18" D, 30" H. 2-Shelf. All-welded 16-gauge stainless steel, polished finish, floor-mount pads included.

♦ XW236, 36" W, 24" D, 30" H. 2-Shelf. All-welded 16-gauge stainless steel, polished finish, floor-mount pads included.

♦ XW248, 48" W, 24" D, 30" H. 2-Shelf. All-welded 16-gauge stainless steel, polished finish, floor-mount pads included.

Selecting the Right Size:

♦ Width, 24" or 30" at 18" depth, the two narrower units suit tight-clearance installations or limited floor footprints where a smaller work surface is adequate. The 18" depth limits front-to-back work surface area.

♦ Width: 36" or 48" at 24" depth. The two wider units provide a larger work surface with more front-to-back depth for larger items or more materials at the work position. The 48" wide unit provides the largest single work surface in the lineup.

♦ Floor anchoring, pre-punched mounting pads are included on all models. Anchor the unit when it will be used in high-traffic areas, when stability under load is critical, or when facility safety or sanitation compliance requires fixed equipment.

♦ All units are 30" high; the 30" height is a standard counter height suited to standing work or seated use with a suitable stool. All models are 2-shelf, providing the work surface plus one lower shelf for supplies, containers, or equipment.

Where Commonly Used:

♦ Cleanrooms and Pharmaceutical Production: cleanroom and pharmaceutical production environments require stainless steel surfaces that resist chemical cleaning agents, disinfectants, and repeated wipe-down use. The Jamco all-welded, polished stainless-steel construction of a work stand maintains surface integrity under sanitation protocols.

♦ Laboratories and Research Facilities: laboratory environments that use the stands as auxiliary work surfaces and supply staging platforms alongside primary lab benches use the stainless construction and open lower shelf to organize lab supplies, containers, and equipment within easy reach of the work position.

♦ Food Service and Food Processing, food service kitchens and food processing facilities using stainless steel work stands for food preparation, staging, and ingredient organization, use the polished stainless surface for NSF-suitable sanitation and the floor-mount pads for stability in commercial kitchen environments.

♦ Healthcare and Medical Facilities, hospital supply areas, sterile processing departments, and medical procedure support areas use the Jamco stainless stands for a sanitary, wipe-down-ready work surface and open shelving position that supports supply organization without hard-to-clean cavities.

CustomMHS is an authorized Jamco distributor. All purchases include the manufacturer's factory warranty.