Vestil Battery Powered Hydraulic Post Table

The Vestil Battery-Powered Hydraulic Post Table is a smart upgrade for controlled lifting and stable transport of heavy parts in busy facilities. Built for material handling, maintenance, and production environments, these tables are ideal for lifting dies, castings, and machine components while keeping the load supported and steady.

The key differentiator is stability. Telescoping corner posts help stabilize the platform and provide full load support during operation, especially valuable when moving dense, high-value parts. Mobility is equally dialed in with two locking swivel casters with brakes for secure positioning and two rigid casters for straight-line tracking.

Power and usability are straightforward. A 12V battery drives the lift and lower function, an onboard charger keeps the unit ready, and the hand control on an 8 ft coil cord lets the operator adjust height while staying in a safe, comfortable position. Six configurations are available across two platform sizes and three capacity tiers.

Models and Specifications:

♦ HT-20-2436-DC, 24" wide x 36" long. Service range 36" to 54". Capacity 2,000 lbs. Telescoping corner posts. 12V battery with onboard charger.

♦ HT-20-3036-DC, 30" wide x 36" long. Service range 36" to 54". Capacity 2,000 lbs. Same construction and features as HT-20-2436-DC at greater width.

♦ HT-40-2436-DC, 24" wide x 36" long. Service range 36" to 54". Capacity 4,000 lbs. Same construction and features as HT-20-2436-DC, but with higher capacity.

♦ HT-40-3248-DC, 32" wide x 48" long. Service range 36" to 54". Capacity 4,000 lbs. Same construction and features as HT-40-2436-DC, but larger.

♦ HT-60-2436-DC, 24" wide x 36" long. Service range 36" to 54". Capacity 6,000 lbs. Same construction and features at the highest capacity in this lineup at this size.

♦ HT-60-3248-DC, 32" wide x 48" long. Service range 36" to 54". Capacity 6,000 lbs. The largest, highest-capacity model in this lineup.

Selecting the Right Model:

♦ Platform size: 24" x 36", 30" x 36", or 32" x 48"; select based on the footprint of the dies, castings, or machine components being handled.

♦ Capacity: 2,000, 4,000, or 6,000 lbs; select based on the weight of the parts being lifted and positioned.

♦ Battery-powered vs. manual lifting: choose this battery-powered version when frequent height adjustments make manual pumping impractical. The hand control on an 8 ft coil cord lets operators adjust height without leaving a safe position near the load.

Where Commonly Used:

♦ Die and Mold Handling in Manufacturing: Manufacturing facilities use this table to position heavy dies and molds at the correct working height for setup and changeover.

♦ Machine Loading and Unloading: Facilities use this table to align heavy equipment with machine openings at the correct height for smooth, controlled loading.

♦ High-Frequency Height Adjustment Tasks: facilities requiring frequent height changes use the battery-powered, hand-control operation to speed up repositioning without manual pumping.

♦ Heavy Component Staging: Facilities handling dense, high-value parts use the telescoping corner posts for stable, secure staging at an ergonomic working height.

CustomMHS is an authorized Vestil distributor. All purchases include the manufacturer's factory warranty.