Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Logitrans ELFRA 1001 Adjustable Box Holder Rotator, 2,200 lb, 36" to 75" Lift

Logitrans ELFRA 1001 Adjustable Box Holder Rotator 

The Logitrans ELFRA 1001 adjustable box holder rotator lifts, rotates and tilts boxes, crates and containers so the contents can be reached at a comfortable height and angle. It lifts with a battery-powered pump and is pushed by hand, on 22" or 27" wide x 49" long forks in a fork-over layout. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models ELFRA 1001-36, ELFRA 1001-47, ELFRA 1001-55, ELFRA 1001-63 and ELFRA 1001-75).

Get a Fast Quote →Read the Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Fork Size Lifting Height Capacity Price View Model
22" or 27" wide x 49" long
36"
2,200 pounds
$17,740.80
22" or 27" wide x 49" long
47"
2,200 pounds
$18,003.15
22" or 27" wide x 49" long
55"
2,200 pounds
$18,265.50
22" or 27" wide x 49" long
63"
2,200 pounds
$18,532.80
22" or 27" wide x 49" long
75"
2,200 pounds
$18,790.20

The box holder adjusts from 31.5" to 48" wide with a single handle and no tools, so one rotator can serve several container widths. The rotator tilts loads beyond 90 degrees, which turns the opening toward the operator or down toward a bin, a table or a conveyor for picking, sorting, kitting and assembly. Logitrans recommends clamps when tilting more than 60 degrees.

Two published limits matter when choosing a model. Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. The full rating also applies only while the load’s center stays close to the rotation center, and tilting capacity falls as that distance grows. Electric-lift models are powered industrial trucks under OSHA 29 CFR 1910.178 according to the Buying Guide, which means operator training and an evaluation at least once every three years.

♦ Fork Size: 22" or 27" wide x 49" long, fork-over
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: 31.5" to 48", adjusted by a tool-free handle
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: battery-powered lift, manual push

Selecting the Right ELFRA 1001 Model
◆ Lifting height, choose the height that puts the box opening at a comfortable working level, and remember that tilting only works while the rotation center is between 27" and 46.5", so a taller model extends the lift but not the tilting window
◆ Fork width, choose 22" or 27" at the time of order, since both use the same 49" fork length
◆ Box holder width, confirm that your boxes and crates fall between 31.5" and 48" wide, and call 866-333-0728 for loads wider than 48"
◆ Load position, keep the load’s center close to the rotation center, since the full rating applies only there and tilting capacity falls as the distance grows
◆ Tilt, choose clamps for tilting more than 60 degrees, since Logitrans recommends them at that angle
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178, since this model has an electric lift

Lift Equipment Buying Guide
Check the tilt window before you choose a lifting height.
See Box holder rotators in the Reel Lifts & Rotators Buying Guide

Where Commonly Used
The ELFRA 1001 is commonly used at assembly, kitting, picking and sorting stations, and on light production lines, to bring boxes and crates to working height and tilt them toward the operator.

CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What are the five ELFRA 1001 models, and what separates them?

Lift height only. The 1001-36, 1001-47, 1001-55, 1001-63, and 1001-75 reach 36, 47, 55, 63, and 75 inches, respectively. Every model carries 2,200 pounds, uses the same 49-inch fork length, and includes the same rotating tilting attachment and adjustable box holder. Order based on the height you need, since nothing else changes across the line.

Which lift height should I specify?

Base it on where the operator can comfortably access box contents, not the tallest option. Heights between 36 and 55 inches cover most standing-height access, with the exact figure depending on operator height. The 63 and 75-inch models suit positioning above standing waist height, or cases where the box is tilted downward, and the tilt angle has to be accounted for in the target height.

What box sizes does the adjustable holder accept?

Widths from 31.5 to 48 inches, adjusted with a handle and no tools. Measure the widest and narrowest containers in your operation against that range before ordering. For loads wider than 48 inches, the ELFRA 1001 is not the right unit; call CustomMHS at 866-333-0728 to identify alternatives.

Which fork width should I order?

Either 22 or 27 inches, specified at the time of order. Both use the same 49-inch fork length, so this is a width decision only. Confirm it against the entry openings on the palletized loads you handle, since the fork-over design engages open-entry loads and the wrong width is not adjustable after delivery.

What does tilting beyond 90 degrees accomplish?

It rotates the box holder and load past vertical, directing the box opening downward or toward the operator. That supports controlled content transfer, particularly when unloading into bins or onto surfaces below the box. A unit that stops at 90 degrees leaves the last of the contents sitting flat in the bottom corner.

Is the push travel powered on this model?

No. The lift is powered; push travel is manual. If operators cover longer distances between stations or move the unit repeatedly during a shift, compare it against a powered-drive model, since manual pushing under a loaded rotator adds up over a shift.